Flashlights

Nitecore TUP Intelligent Pocket/Key Chain Flashlight

“Keep Innovating” is Nitecore’s slogan. That concept is represented well, with the Nitecore TUP, a pocket/key chain flashlight of amazing innovation!

 

Super Small Package

Inside the TUP package, is the flashlight, a user manual, and a key-ring… that’s it. There’s a pocket clip attached and a self-contained (non-removable) lithium battery. Of course it’s USB rechargeable, but they don’t include a charging cable.

Specifications

  • Length; 2.77″

    Nitecore TUP LED

  • Width; 1.16″
  • Depth; 1.03″
  • Weight; 1.88 oz

Nitecore TUP Features

  • Uses a CREE XP-L HD V6 LED
  • Five output levels w/direct access to Turbo & Ultra-low
  • Utilizes a total reflective optic lens for uniform light
  • A multifunctional OLED display informs the user of all light functions
  • USB Rechargeable (non-removable battery)
  • A constant-current circuit provides stable output
  • Two user modes; ‘DEMO’ & ‘DAILY’
  • Advanced Power Cut-off (DEMO mode only)
  • Dual switches for convenience
  • Mode memory
  • Two separate lock-out modes (half & full)
  • Metal ring can sustain up to 66 lbs (30 kilograms)
  • Impact resistant to 1 meter

Modes and Output

There are five brightness levels; ultra-low, low, medium, high, turbo. Levels are as follows;

  • 1 lumen
  • 15 lumens
  • 65 lumens
  • 200 lumens
  • 1000 lumens

There are no ‘flashing’ modes.

Operating the Nitecore TUP

Daily Mode

On the front-facing body of the light are two switches. One is for power and the other for mode switching. Short pressing ‘power’ turns the light on & off. Press ‘mode’ to go from lowest to highest. The ONLY way to access Turbo is by applying a HOLDING press to the ‘mode’ switch. This can be accomplished whether it’s on or off. But just remember you need constant pressure on the switch in order for it to work.

For ultra-low mode, press & hold ‘power’ while it’s off.

To check battery voltage without turning it on, give the ‘mode’ switch a short press.

Demo Mode

This setting operates the same as ‘daily mode’ with one exception. With any activation, a 30-second timer begins…counting down the seconds until the light shuts off.

The OLED Display

Checking cell voltage

Level 1

Level 2

Level 3

Level 4

Level 5

Showing run time

 

 

 

 

 

 

 

 

 

 

This is mighty cool, and is the first flashlight I’ve ever seen to have such a feature.

Thanks to the OLED display, you’ll always know what the Nitecore TUP is doing. From the images on this page, you can get a feel for the sort of information the display offers. For instance the moment it’s switched on, it shows what output level it’s on and displays the setting. Within two seconds, it changes to show you how long you can use the light for, on THAT particular level.

Each time the output level is advanced, the same info is displayed… starting first with how many lumens you’re seeing, then displaying the elapsed time, on that level.

When the light is off, pressing the ‘mode’ button will show battery voltage, and which output level it was on last.

As previously explained, if the light is set to ‘demo mode’, there will be a 30 second countdown time running with each level change.

Changing Mode Settings

Illuminated charging

USB port

Switching from ‘daily’ to ‘demo’ mode is super simple…but you’ll both hands to do it.

Press and HOLD, BOTH switches at once. The TUP will blink (once for demo, and twice for daily) and you see the names of both modes in the display. The one it’s switching to will be highlighted.

Locking-out the Switch

To prevent accidental activation, the Nitecore TUP allows the user to perform either a HALF or FULL lockout! When locked ‘half-way’ the ‘power’ switch won’t work. BUT, you can access ‘turbo’ through the mode switch. In FULL lock mode, neither switch will function.

To perform the lockout; give the ‘power’ switch a short, then HOLDING press. The picture of a padlock with the numeral “1” inside it, will display. If you release the button, it’s locked half-way. If you keep holding, a “2” will appear. Now it’s locked 100%. Perform the action again to UN-lock it completely.

Charging the Internal Battery

Connect a standard (non C-type) USB plug to the port on the side of the light. During charging, both switches will flash in an illuminated ‘blue’. When the charge is complete, it’ll turn to a steady blue. The display will confirm the completed charge, with an icon of a FULL battery.

Checking the Beam

Low

Medium

High

Turbo

Turbo

Ultra-low

On low

on medium

On high

On turbo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Closing Comments

There are several positives to the Nitecore TUP.

It’s super compact and with the clip, it’s great as an EDC light. The OLED display is one of the coolest things I’ve seen on a flashlight to date! Knowing what mode the light will give you BEFORE you turn it on, could me mighty helpful 🙂 Instant access to ultra-low and turbo is also appreciated…except MAYBE for the requirement of having to hold the button for turbo.

The only downside to the TUP (for me) is that because of the key ring loop on the bottom, it can’t tail stand  🙁  And if there’s ONE thing I appreciate, is the ability to tail stand. So without that, it has limitations. In a perfect world, they would’ve made the base ring removable.

As a whole I like the TUP and would recommend it.

The Nitecore TUP was furnished for review by Banggood. If you’d like to check it out on their site, click here and don’t forget to enter coupon code “BG1387” which will knock the price back a few 🙂

 

 

 

BR Wilkie

Recent Posts

Jetbeam E26 Kunai UV Flashlight Review

I haven't owned a new Jetbeam flashlight is quite some time. Having said that, I'm…

1 month ago

Nitecore HC65 Headlamp Review

Since the motto of Nitecore is "keep innovating" please join me now in this review…

6 months ago

Nitecore EDC33 Lumin Shield Flashlight Review

As Nitecore continues to implement new concepts with LED flashlights, let's dive in with my…

9 months ago

Wuben X3 Wireless Charging LED Flashlight Review

This is different! The Wuben X3 "Owl" is a dual-LED flashlight that features wireless charging…

11 months ago

Imalent MS03 High Lumen Flashlight Review

I've had a few flashlights from Imalent over the years, and today I'm reviewing one…

12 months ago

Acebeam E75 USB Rechargeable Flashlight Review

Today I'm reviewing the Acebeam E75. Stick around for this one....because I think you'll like…

1 year ago

This website uses cookies.