Flashlights

Manker E14 Nichia LED Flashlight Review

I previously reviewed the U11… excellent flashlight! Now it’s time to take a look at the U11’s smaller cousin! Introducing the Manker E14.

Big Stuff In A Tiny Package

So what you have here is the Manker E14, plus a comprehensive manual, and an accessory package that includes a lanyard, a pocket clip, a spare tail cap cover and a spare o-ring.

Pretty Impressive

The length of the E14 is only 3.1″!  The weight (with an 18350 battery) is 119g (4.20 oz) which is heavier than most flashlights of this size.

The Nichia LED’s

The (very warm) Nichia 219b beam

 

 

 

 

 

 

 

  • It’s waterproof to IPX-8 — meaning it’s submersible to 2 meters.
  • It’s made from aero grade aluminum alloy and copper.
  • It uses a highly intelligent driver which regulates output and provides extra stability on low modes.
  • The E14 is available in two different LED configurations. One is an XP-G2 which is rated to provide up to 1600 lumens. The other is a Nichia 219b. In each LED configuration, there are actually FOUR LED’s. The tint on the Nichia version is extremely warm, and the output is rated at 1400 lumens. The XP-G2 tint is cool white.
  • It’s impact resistant to 1 meter.
  • It uses just ONE battery. Either a rechargeable 16340 or an 18350 (IMR preferred).

    Next to an 18350 battery

  • There are two groups of working modes. Group 1 has 7 modes and group 2 has 4 modes. There are also 4 hidden modes – (3 are flashing).
  • Features mode memory (by default; set to off)

Let’s Talk Modes

As with the previous Maker flashlights I reviewed, the E14 has two separate operating “groups”. Group One has 7 constant lighting modes. They are;

  • Moonlight

    Same size as a glue stick!

  • Low
  • Medium 1
  • Medium 2
  • High 1
  • High 2
  • Turbo

Group Two has 4 regular modes. They are;

  • Low
  • Medium
  • High
  • Turbo

In addition; there are 4 “hidden” modes. They are; (in order of appearance)

  • Turbo
  • Tactical strobe
  • Battery voltage check (blinks once for every 25% of battery power)
  • Bike flasher

Battery life on a charge isn’t too bad…depending on the mode used most. On turbo, don’t count on more than 15 minutes!! Plus, the heat generated by the light when using it on the high modes can be so intense, that you WON’T want to do that for too long.

On medium 2 and high 1 mode, about 90 minutes of continuous use is pretty fair.

Manker E14 Operating Procedure

By default, the light is set to Group One (with memory turned off).

The only switch

When you turn it on, it’ll be in moonlight. Each VERY LIGHT touch of the button thereafter, will advance to the next mode. If you do nothing, it will continue in that sequence indefinitely. Whatever mode you turn it OFF in, it will return to moonlight the next time it’s switched on.

If you want to activate mode memory (so it always returns to the last mode used), you’ll need to “turn it on”. Here’s how you do that.

Turn the light on (in moonlight) then lightly and VERY quickly…press the button about 15 times. This MUST be done in rapid succession. This is essentially ramping through each of the 7 modes, twice. Once you’ve finished that sequence, the light will turn off…pause…and BLINK TWICE. It will pause again, and BLINK TWICE a second time. It is between the second set of blinks that you need to click the light OFF. If you’ve done it correctly, mode memory will now be activated. Just so you know, this might take some practice the first time!! If you let BOTH sets of blinks go before you click…it won’t work. You must shut the light OFF BETWEEN the second set of blinks.

Group One, of just 4 main modes, is entered by doing the 15 taps I spoke of above. Then clicking OFF during the FIRST set of double-blinks.

With ext tube & 18650

To reach any of the 4 hidden modes, you need to be on the lowest mode of the group you’re set to. It’s then that you press and HOLD (then release) the switch…but only for 1.5 seconds. You’ll know it’s correct when turbo appears! If that’s not the mode you want, press, hold and release again, and strobe will appear. Want the bike flash mode? Do it TWO MORE TIMES. I know this might sound like a pain…but it’s much faster to do it, than it is to explain it.

Please note; when memory is activated, the E14 does something I don’t think I’ve ever seen a similar flashlight do. It memorizes the FLASHING modes! So if you have memory turned on, and use the light in the bike flash mode, it should resume that mode next time you turn it on!

Other Options

The extension tube

Due to the small size of the E14, battery runtime is a tad short. But, there’s an option available to extend runtime by using an 18650 battery instead of the smaller 18350.

Enter the Manker E14 extension tube!

With the tube, the length of the flashlight increases to 4.4″ I haven’t tracked the difference in runtime between the two battery types, but typically an 18650 will offer close to two hours on high mode.

Let’s Look At The Beams

Each picture may be viewed full-size by clicking on it

On low

On medium

On turbo

On low

On medium

On high

On turbo

On low

On medium1

On high1

On high2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

What’s MY Take On the Manker E14?

The Manker E14 is as good as any midget-size EDC flashlight that I’ve ever owned.

Once you get the hang of setting it the way you want, it’s simple to use and has some nice features.

The tail button is so easy to press, that cycling though the modes can be done very quickly.

The tint color on the Nichia version (which is what I have) is beautiful.

If you’re specifically looking for a light that throws the beam a fair distance… the E14 isn’t for you. For that, I would recommend the Manker T01. However, for for close up illumination indoors, and for up to 50 feet in front of you outdoors… the E14 is superb.

GearBest supplied the E14 for testing purposes. To check out the light on their site, click here! Prefer Amazon (which actually comes with an extension tube and an 18650 battery?)… then click here!

Questions or comments?? Don’t hesitate to let me know!

BR Wilkie

View Comments

  • Manker is truly disappointing from a service perspective. I purchased an E14 2 Nichia that did not operate. I had to pay to ship the unit back to Manker. They sent the damaged unit back to me claiming that there was no issue with the light. I purchased a new battery for the unit, which also did not work. They have refused to replace the light. They have said that if I want to pay to ship it back to them, they will inspect it again. The light cost $69.00 , the first return cost me $17.00. It would be at least that to return it again. Never again will I purchase a Manker.

    • I'm truly sorry you've had a bad experience with the E14 David. It's very frustrating when things like that happen, and even more-so when customer service doesn't step up. I'd be curious to know how long you've had, what exactly it was doing, and what type of batteries you were using. If Manker tested it, and got it to work, then something is fishy! Thanks for the information David.

Recent Posts

Jetbeam E26 Kunai UV Flashlight Review

I haven't owned a new Jetbeam flashlight is quite some time. Having said that, I'm…

1 month ago

Nitecore HC65 Headlamp Review

Since the motto of Nitecore is "keep innovating" please join me now in this review…

6 months ago

Nitecore EDC33 Lumin Shield Flashlight Review

As Nitecore continues to implement new concepts with LED flashlights, let's dive in with my…

9 months ago

Wuben X3 Wireless Charging LED Flashlight Review

This is different! The Wuben X3 "Owl" is a dual-LED flashlight that features wireless charging…

11 months ago

Imalent MS03 High Lumen Flashlight Review

I've had a few flashlights from Imalent over the years, and today I'm reviewing one…

12 months ago

Acebeam E75 USB Rechargeable Flashlight Review

Today I'm reviewing the Acebeam E75. Stick around for this one....because I think you'll like…

1 year ago

This website uses cookies.