Reading many flashlight reviews online, has prompted me to write this post that will answer…
Lumintop has taken a popular flashlight design, of late, and put upon it their own individual spin. The result; the Lumintop SD Mini.
I say “popular flashlight design” because visually, it compares favorably to the Nitecore MH20. Side by side, you may also see similarities with the Nitenumen NE01, or perhaps even the U11 from Manker. But since imitation is the sincerest form of flattery, then we’ll take it as a way of complementing something successful. Take special note of the aggressive (and quite attractive) knurling covering the tube.
So, the SD Mini comes in the usual unpretentious, recycled brown, Lumintop box. The flashlight is nestled in a foam cutout and underneath are a host of well conceived accessories.
Now, one particular accessory is included ONLY if you buy from the link I’ve provided at the conclusion of this review. THAT would be a Lumintop 3400mAh (protected) 18650 battery. The other accessories, which are standard to everyone, are a nylon belt holster, a USB charging cable, a bright orange adjustable lanyard, a spare o-ring, and a spare USB cover. A (removable) pocket clip, as you can see, is already attached.
*The LED is also available in a Cree XM-L2 (U2) version.
*The output levels of the XM-L2 (U2) version are as follows;
With just one switch, the SD Mini is easy to operate. From OFF, just give it one standard click. Once it’s on, each click to advance the modes. Low>medium>high>turbo is the order. To shut it off, hold the switch for two seconds. Like with most good flashlights, the flashing modes are hidden. Too see them, the light must be OFF. So from OFF, press and hold switch for three seconds. Strobe will activate. A single click will advance to SOS and then to aviation (location beacon) mode. To turn it off from there, you must press and hold. And that’s it.
With an 18650 battery in the light, just connect the included micro USB cable to the internal port. A GREEN LED will illuminate and “blink” during the charging process. When finished, the LED goes solid. I ran a voltage test while charging, and at the beginning, got a solid 700mA of charging current. After a short while, it lowered to a stable 590mA.
The internal charging circuit will only work with an 18650.
The Lumintop SD Mini has no “instant access” to any constant lighting modes. So, unlike the MH20 which it mimics, you cannot go to either the lowest-low or turbo at will. It DOES however remember the last mode.
As far as strobe is concerned, I can see where if you HAD to use it for self-defense…(and because seconds may count)…it’s annoying that it can only be accessed while the light is turned OFF. If you’re approached in the dark — and the light is already on — having to hold the switch and turn it off, THEN, hold the switch again for another three seconds to activate strobe, COULD be a game changer! On the other hand, turbo is mighty bright…and faster to access.
On the plus side; the light is small and easily carry-able. The green LED beneath the power switch doubles as a low-battery indicator, and a charging indicator as well.
A possible Amazon purchase link to the Lumintop SD Mini is right here!
I haven't owned a new Jetbeam flashlight is quite some time. Having said that, I'm…
Since the motto of Nitecore is "keep innovating" please join me now in this review…
As Nitecore continues to implement new concepts with LED flashlights, let's dive in with my…
This is different! The Wuben X3 "Owl" is a dual-LED flashlight that features wireless charging…
I've had a few flashlights from Imalent over the years, and today I'm reviewing one…
Today I'm reviewing the Acebeam E75. Stick around for this one....because I think you'll like…
This website uses cookies.